How much is a ton of submerged 0-degree ultra-soft TPE bait material in Hebei, Zhejiang
Source：德创化工Time：2021-03-25Hits：1756
The hardness of TPE material submerged at 0 degree is tested by Shore C. The greater the data, the softer the hardness of the material is. We will also use 0 to represent the ultra-soft TPE material, one 0 means 0 degree, and there are 8 zeros at the highest. 0 degree materials are usually transparent or translucent particles, which are nontoxic and odorless. Excellent elongation, up to 1500%.
The feel of TPE material immersed in water at 0 degree is close to silica gel, which is generally molded by injection molding or pouring. It is mainly used to produce sex toys, toys, gel cushions and anti-skid mats for automobiles. Guofeng Rubber & Plastic Co., Ltd. is a well-known sex toys supplier in China.
High transparency TPE8 degrees, 10 degrees, 12 degrees and 0 degrees. Simulated skin, tasteless and oily. High transparency can reach 98%. It can also make skin color, high ductility, excellent resilience, high tensile property, good fluidity and yellowing resistance. It can replace silica gel /PVC material without smell, oil and spraying. Non-toxic and environmental protection meet ROHS,REACH,PAHS,EN71 and other environmental testing standards.
The injection efficiency of TPE with 0 degree immersion is relatively low, because the hardness is too low, and the processed product shrinks greatly, with a shrinkage rate of 1.6~2.0%. Water lines will appear on the surface. The recommended injection temperature is 120-150℃. 0 degree particles are sticky, and feeding difficulties will occur in the production process. We suggest that the injection molding factory reduce the temperature in the area of the discharge opening and adopt pressing type auxiliary feeding, such as pressing down with a stick, which is directly effective. A forced feeder can also be installed, and a high rotating speed and low feeding mode can be adopted. Heating section of blanking area is closed.
The SEBS molecular weight of TPE substrate is needed to determine the injection temperature of TPE material at 0 degree submerged. TPE modified by high molecular weight SEBS has high injection processing temperature, while TPE modified by low molecular weight SEBS has lower injection temperature. In addition, it is also related to the processing structure, mold design and injection molding machine model. If the product structure and mold design require high fluidity of materials, it is necessary to increase the injection molding processing temperature.
If our 0-degree TPE material order lasts for a long time, we can reform the injection molding machine. For example, the feeding opening is enlarged, the charging barrel is reformed, and the screws are newly assembled. All these will improve the processing efficiency. SEBS, the TPE material substrate used by Guofeng Rubber & Plastic for sex toys, is all selected from Japan's Keleli or America's Keten.
Dongguan Dechuang Chemical Co., Ltd. is a rubber and plastic raw material manufacturer specializing in the production of elastomers TPE/TPR/TPU/TPE/TPV. Dechuang Chemical has its own factory and R&D team, and has strong new product development ability. We will serve you wholeheartedly if there are any questions about the elastomer materials of thermal statues!
