TPE folding drum folding basin material, Dechuang chemical industry
Tpe Raw material particle is a general term for all kinds of thermoplastic elasticity, which can be divided into styrene type thermoplastic elasticity (TPE-s) , hardness from 0A to 45d 95A, polyester type Thermoplastic Elastomer, engineering type Elastomer, high hardness and high modulus, hardness from 32d (70a) to 60d, polyurethane Thermoplastic Elastomer, good wear resistance, hardness from 60A, Olefin type Thermoplastic elastomer (TPO or TPV) , base material for EPDM / PP, dynamic vulcanization material, good weather resistance, small compression deformation. MOLDING MODE: Injection Molding, extrusion, blow molding, etc. . INJECTION MOLDING INCLUDES: separate injection molding, or two injection molding, with pp.ps. PE.PA. . P.C. ABS and other matrix materials coated adhesive, used for bicolor or monochrome plastic elastic products. TPE Raw material particle substitute material: transparent and food grade product. Replace Soft Pvc, traditional rubber and some silicone rubber. Specifications: General Grade, transparent grade, food grade, injection grade, abrasion grade, weather resistance grade, high hardness grade, medical grade series products. Styrene type TPE (Thermoplastic Elastomers) , also known as TPS, is a block copolymer of Butadiene or Isoprene and styrene, whose properties are most similar to those of SBR rubber. Advantages of TPE PLASTIC PARTICLES: 1. The utility model can be reused effectively to save energy and is an ideal material to replace rubber and Silica Gel. 2. Stable properties, with a good temperature range-50-100 °C, aging resistance, chemical resistance, solvent resistance. Superior Processing Performance 3. Environment-friendly, non-toxic, safe, excellent coloring, soft touch. TPE / TPR materials do not introduce heavy metal and toxic phthalate plasticizer in the production process, which is in accordance with REACH, ROHS, EN71, PAHS and FDA environmental testing. It's a good substitute for PVC. 4. Energy saving. Most Thermoplastic elastomer do not require curing or curing time is very short, production efficiency is greatly improved, forming cycle is short. 5. It has high elasticity of rubber and can be processed by direct injection molding. It can be injection molded twice, and PP, PE, PC, PS, ABS and other Matrix material coating adhesion, or can be molded separately. Disadvantages of TPE particles: TPE / TPR is the big problem of poor heat resistance, the use of temperature can not exceed 80 °C. At the same time, its strength and elongation, weather resistance, oil resistance, wear resistance and so can not be compared with rubber.
