4 Points to Pay Attention to in TPE Storage
Source：德创化工Time：2020-03-11Hits：1963
We must pay attention to the preservation of TPE materials and take protective measures to avoid damaging products or fire in the whole warehouse. What should be paid attention to when storing TPE materials? The following explains the conditions to be met when storing TPE materials.
I. ambient temperature
TPE manufacturers must pay attention to the storage temperature when storing TPE materials. Although this material has chemical advantages and temperature in use, it does not mean that it should be placed in a high temperature environment when storing. High temperature can easily cause TPE material to melt, so it should be placed in a dry and ventilated place to avoid direct sunlight.
II. Environmental Humidity
TPE manufacturers should pay attention to the humidity of the environment in addition to the temperature when storing TPE materials. If the ambient humidity is too high, there will be a lot of moisture in the air. It often has a certain influence on the products, which is why it is necessary to ensure the humidity of the surrounding air.
III. Air Oxidation
When TPE materials are stored for a long time, they will often come into contact with the air. Moreover, in many warehouses, the air quality is not as high as people think. Therefore, long-term contact will produce oxidation reaction and affect the overall performance. Therefore, people must check more during normal storage.
Four, good seal
TPE materials should be sealed in plastic bags and finally put into boxes to prevent dust or other substances from being trapped in them. Thus improving its performance.
German chemical TPE manufacturers usually produce large quantities of TPE materials. Most of the time, TPE materials produced are not directly put into the transportation link after production, and eventually flow into the market. It is often to produce a certain batch of TPE materials and then transport them after storage. Therefore, we must pay attention to the above 4 points so as to ensure the quality of TPE materials and some unnecessary losses.
